Support

Applies to: Easy NAS Photo Viewer (iOS) Version: 1.0


About these apps

The developer publishes three independent iOS apps. Install only the ones you need — none of them requires the others.

App What it does Synology NAS required
Easy Web Image Collector (Home Screen: WebImage) Tap images in a web browser to download them to your iPhone No — works right after install, no setup
Easy NAS Photo Viewer (Home Screen: NASPhoto) View photos and videos on your iPhone and on your Synology NAS (or an SMB shared folder or SFTP server), and move files between them Yes (an SMB shared folder or SFTP server also works)
Easy NAS Download Manager (Home Screen: Downloads) Remotely manage Download Station on the Synology NAS you own Yes (required)

The three apps do not share credentials or settings. Each is configured separately (see FAQ). The only thing they share on the same device is the ad-free purchase status.


Requirements


FAQ — common to all apps

Q. Do these apps collect my data?

The developer does not. There is no developer-operated server and the app sends the developer no requests. No analytics SDK and no third-party crash reporting.

The apps are free and show Google AdMob ads; to load them, the Google SDK inside the app sends some device data to Google. On first launch iOS shows a tracking permission prompt once — allow it and you may see ads matched to your interests (using the advertising identifier); don’t, and you see non-personalized ads only. Either way the app works the same and shows the same number of ads. See the Privacy Policy for details.

Q. How do I turn personalized ads (tracking) on or off?

Use this app’s switch in iOS Settings › Privacy & Security › Tracking. Turn it off and later ad requests are non-personalized. In the European Economic Area, the UK and similar regions you can also change your Google ad consent in the app under Settings → Remove Ads → Ad Privacy Settings.

Q. Do my settings sync between iPhone and iPad?

Some settings do. Appearance, search engine, sort order, default folder choices and similar values travel to your other devices signed into the same Apple ID via Apple’s iCloud Key-Value Store. There is no in-app toggle; it runs quietly.

Credentials do not sync. Your NAS address, account, password, and two-factor seed are stored in the iOS Keychain as this-device-only (ThisDeviceOnly), so they never travel to another device and are not included in device backups. On a new device you enter them again.

The predecessor app (SynoBrowser) documented credentials as syncing via iCloud Keychain. Verification against the code showed that was not the case; this document corrects it.

To stop settings sync entirely: iOS Settings → [your name] → iCloud → turn iCloud off for the app.

Q. Does anything remain after I delete the app?

Deleting the app removes its local data — files in its own folder and its settings. A few things can remain:

Q. How do I clear stored data from inside the app?

The Settings screen has controls for clearing stored data. Where they live and what they are called differs per app — some collect them under a “Data” section, others offer a single “Clear web data” under “Browser”. Each asks for confirmation once, and the action cannot be undone.

Q. The app is always light / always dark

Settings → Appearance — choose Light, Dark, or System. The default is System.

Q. Something went wrong. What should I send?

The Diagnostic Log in Settings shows the running record and can export it via the share sheet. (Depending on the app it sits under “Diagnostics” or “About”.)

The log stays on your device and is never transmitted automatically — it leaves only when you send it. It may contain timestamps and outcomes of operations, error messages, and the address and request path of servers the app contacted. It does not contain passwords or two-factor seeds, and server session keys are masked before being written. Please send it knowing that. You are welcome to write in without attaching one.

Q. All three apps use the same NAS — why configure each one separately?

That is deliberate. The three apps do not share the Keychain store that holds credentials; each has its own access group so that no app can read another’s credentials (the only record all three read is the ad-free purchase status). The cost is entering the NAS address, account, two-factor settings, and certificate trust once per app.


FAQ — this app

Q. Where do I choose between upload and download?

You don’t. Where a file is decides where it goes.

That is why there is no direction switch in the app. Only uploads ask where files should land; downloads always go to the iPhone’s “Downloads” folder.

Q. I can’t download a whole folder from the NAS

Correct — NAS to iPhone works on files only. If a folder is part of your selection the download button turns off, because the API this app uses does not offer a way to have DSM bundle a folder for download.

The other direction does work: iPhone to NAS accepts folders, and the subfolder structure is recreated on the NAS.

Q. I want to upload photos from the iOS Photos app

On an iPhone folder screen, tap Upload from Photo Library… (or the upload button → Choose from Photo Library) to open iOS’s photo picker. Pick photos and videos, choose the NAS folder, and they are uploaded in their original format.

The picker is a system screen separate from the app, so the app receives only the items you pick — which is why it never asks for permission to read your photo library.

Alternatively, in Photos tap Share and choose this app; the items land in “Received”, and you can upload them from there.

Q. Can I switch apps during a transfer?

Uploads (iPhone to NAS) keep going. They are handed to iOS background transfer, so they continue when you lock the screen or switch apps; results that finish while the app is away show up the next time you open it.

Downloads (NAS to iPhone) do not support background transfer. Keep the app on screen while receiving.

If a whole-folder upload fails partway, the files already uploaded stay on the NAS — deleting them was judged the more dangerous option. Check the failure count on the progress screen and upload again; your Settings → Upload → “Rename automatically on conflict” choice applies.

Q. A video won’t play

Try a different engine. Settings → Video → Default playback method offers four:

  1. Built-in VLC — the widest codec and container coverage. MKV, AVI, WMV and FLV usually open here.
  2. Direct playback (AVPlayer) — Apple’s own. Smoothest for MP4, MOV, H.264 and HEVC, with PiP and AirPlay.
  3. Video Station — the NAS transcodes and streams it. The Video Station package must be installed on the NAS.
  4. Open in another app — hand the file to VLC for iOS or another player.

To choose per video, turn on Settings → Video → Show the picker on playback.

Playing NAS videos requires the NAS HTTP port (DSM default 5000) to be open. The playback engines each use their own network stack and cannot share the self-signed certificate trust the app has stored. If you only expose HTTPS, enable HTTP in the DSM Control Panel. (Synology’s own DS file client works the same way.)

Q. Subtitles don’t appear

A .srt, .smi or .vtt file with the same name must sit in the same folder as the video. For movie.mkv, use movie.srt or movie.ko.srt.

Q. My video starts in the middle

That is automatic resume. Reopen a video you were watching and it continues from where you stopped. Nothing to choose, nothing to enable.

To start over, tap “From the beginning” on the chip that appears briefly when playback starts, or drag the scrubber to zero. A video you watched to the end clears its own record. To erase every record, use Settings → Data → Clear resume history.

Q. What is the difference between “Received” and “Downloads”?

Both live in the “iPhone folders”, a shared storage area on the device used together with Easy Web Image Collector (images that app saves appear in the “Web Images” folder), so they are not visible under “On My iPhone” in the Files app. Files you put into this app’s folder through Files or Finder on a Mac are moved into the iPhone folders on the next launch.

Q. What licence does the built-in VLC playback use?

VideoLAN’s MobileVLCKit (LGPL v2.1 or later) is embedded as a dynamic framework. The licence, the copyright and a link to the source repository are in Settings → Open Source Licences inside the app. No GPL-only plugins are bundled. The other open-source components are AMSMB2 (with libsmb2, LGPL v2.1 or later) for SMB connections and Citadel (MIT) with its dependencies (swift-nio-ssh, swift-nio, swift-crypto/BoringSSL, swift-asn1, swift-log, swift-atomics, swift-collections, swift-system, BigInt) for SFTP; the only non-open-source third-party code is the Google Mobile Ads SDK, used to show ads. All are listed under Settings → Open Source Licences.

Q. Is this a Synology app?

No. This is an independent app, not made or endorsed by Synology Inc. Synology, DiskStation, DSM, QuickConnect and Video Station are trademarks of Synology Inc., used here and in the App Store description only to say which device the app works with. Please send support questions to the address below, not to Synology.


FAQ — connecting to a NAS

Q. I can’t reach my NAS

Check these in order.

  1. Address — on the same Wi-Fi use the LAN IP (e.g. 192.168.1.10); from outside use DDNS or a QuickConnect ID.
  2. Port — DSM defaults are HTTP 5000 / HTTPS 5001. Use your own if you changed them.
  3. HTTPS with a self-signed certificate — DSM’s self-signed certificate triggers a trust prompt on first connection. Declining it blocks the connection.
  4. Firewall — verify the port isn’t blocked under DSM Control Panel → Security → Firewall.
  5. Two-factor authentication — enter the OTP, or store the OTP seed in Settings so the app can generate codes itself.

Q. Why does it ask for “Local Network” access?

Since iOS 14 the system asks once when an app first contacts a private IP (192.168.x, 10.x, and similar) — which is what a NAS at home usually is. The app does not discover or scan for devices; it connects only to the address you typed into Settings. Denying this permission prevents the app from reaching a NAS on your LAN.

Q. My self-signed certificate keeps being rejected

Run a connection to that NAS profile once from Settings and accept the trust prompt. The app stores the fingerprint of the certificate you approved and checks it on later connections. If the server issues a new certificate the fingerprint changes and you are asked again — the most reliable fix is to delete the profile and create it anew.

Q. Can I use more than one NAS?

Yes. Register several NAS profiles in Settings and switch between them. Address, account, two-factor settings and folder choices are kept independently per profile.

Q. My profiles don’t appear on my other device

Credentials never leave the device (see the common FAQ above). Create the profile again on the new device.


Bug reports and feature requests

Including the following gets to a fix much faster:


These are indie, one-developer apps. Support is best-effort and response time may vary.

Synology, DiskStation and Download Station are trademarks of Synology Inc. These apps are not made or endorsed by Synology Inc. and are not affiliated with Synology Inc.